Yamitsu 30W

  Yamitsu algae master uv‚‚¾‚s are made from
UV stabilised materials to ensure a longer
life and incorporate turbulators to enhance
the unit‚‚¾‚s performance. Large inlet and
exhaust ports make the algae master uv
suitable for a wide range of pond uv
applications. It is recommended that the
algae master uv should be installed using
solid solvent weld pipe.
All algae master uv‚‚¾‚s come complete with
(glue in) hosetails enabling them to be
connected to ½‚‚½, ¾‚‚½, 1‚‚½, 1¼‚‚½ and 1½‚‚½
flexible pipe. Algae master uv‚‚¾‚s will also fit
most popular 1½‚‚½ household solvent weld
waste and pressure pipes.
Algae Master Pond UV Installation-
If you have a severe algae problem you
should effect a partial water change before starting the
installation. Yamitsu Algae Master Pond UV can be added
to any existing filtration system. For best results algae
master units should be fitted in line, after the pump, with
water being forced through them. Use the largest size
of pipe possible. If hosetails are to be used, it is very
important that they are trimmed to the largest possible
size that will fit inside the flexible pipe (before glueing in
place). This will ensure that the maximum flow rate can
be obtained for the size of pipe.