NT Labs Flukasol Your Solution for Skin and Gill Flukes
When to Use: NT Labs Flukasol is your answer when your fish exhibit signs of a fluke infestation, such as flicking, gasping, excessive mucus, or lethargy. It’s recommended to use this treatment after confirming the diagnosis through microscopic examination.
How to Use:
Test Your Water Quality:
Utilize NT Labs Test Kits to assess the water quality accurately.
Shake Well:
Before use, shake the Flukasol bottle well to ensure proper mixing.
Mix the Dosage:
Measure the appropriate dosage and mix it in a clean bucket of pond water.
Even Distribution:
Pour the mixed solution evenly over the surface of the pond.
Treatment Duration:
Leave the treatment in the pond for 7 days.
Switch Off UV Filtration:
Disable UV filtration for the entire 7-day treatment period.
Aerate the Pond:
Ensure proper aeration of the pond during the treatment.
Repeat Dose Consideration:
If a repeat dose seems necessary, perform a careful diagnosis using microscopic examination and the Diagnosis Tool. Consider using a different medication if needed.
Post-Treatment:
Allow a 7-day interval after medicating before performing a partial water change or re-treating with another medication.
Observation:
Always conduct treatment when you have sufficient time to observe fish and take necessary action in the rare event of a bad reaction.
Warning:
Do not use Flukasol at water temperatures above 30°C.
Avoid use in hot, humid, or thundery weather.
Do not mix Flukasol with other medications.
Choose NT Labs Flukasol for an effective and reliable solution against skin and gill flukes, ensuring the health of your fish and the well-being of your pond.
